ViaBlue TS2 Tubulaire Banana Plug - 1 Pair
Features:
- 24 carat real gold plated
- Transparent isolation
- Low resistance contact
- M4 screws for fixing cables
- For cables up to 8 mm2
The ViaBlue TS Series was designed to provide a connector ideally suited for every possible connection and jack type. All TS connectors protect against short-circuiting with a transparent insulation bushing. The opening to the cable receiver of the TS plug is 5 mm wide so that cables of up to 8 mm2 can be installed.
ViaBlue TS2 banana plugs establish contact to the speaker jacks with a split tube system. When plugging the TS2 banana plug into speaker jacks, a cut-off sinusoidal line shape cylinder creates a steady, constant pressure over the entire gripping surface, which creates optimal surface contact and ensures an extremely firm hold of the banana plug.
Termination TS connectors:
Speaker cables can be very easily and comfortably installed in ViaBlue TS plugs. To do this, you will need a stripping tool to strip the cable's insulation as well as a screwdriver (hexagon socket 1.5) to fasten the cable in the plug-in connections.
The speaker cable should be stripped approx. 8 mm and then plugged tightly into the internal housing of the TS plug-in connectors. This inner part of the TS plug-in connectors narrows in such a way that the influx of air is cut off. In this way, the stranded conductors are protected from oxidation. The cable can be comfortably tightened by the two large fixing screws and therefore has a very strong grip on the plug. Solder is not necessary.
In order to protect even better the sensitive stranded conductors of a high-quality speaker cable from possible stripping by the screwing, as well as against oxidation over the long term, it is advisable to use the ViaBlue OFC copper crimp sleeves.
|
