Pro-Ject Debut III Turntable - Yellow glossy & Phono Box MM | 40069

Main page » Catalogue » Turntables » Pro-Ject Turntable » Debut III Line » Debut III & Phono Box » 40069

Your account | Shopping Cart | Checkout

Pro-Ject Debut III Turntable - Yellow glossy & Phono Box MM

269,00 EUR
incl. 19 % Tax excl.
Weight of packaging: 8.00 KG

Product No.: 40069
Print product data sheet

Shipping time:

2-4 Days

Pro-Ject Debut III Turntable - Yellow glossy & Phono Box MM

Pro-Ject Debut III Turntable - Yellow glossy & Pro-Ject Phono Box MM

Manual turntable with fitted cartridge Ortofon OM 5E in combination with the external Pro-Ject Phono Box MM to a special price.

Pro-Ject Debut III:

Good sound from sound technology:

Tonearm bearing comprises inverted hardened stainless-steel points and sapphire thrust-pads
Headshell and armtube formed from a single aluminium workpiece, rotation allows adjustment of needle azimuth despite fixed headshell
Steel platter with felt mat
Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
Motor decoupled to reduce vibration

Features:

Supplied with Ortofon OM 5E cartridge fitted
Pro-Ject 8.6 tonearm
Nominal speeds of 33 / 45 / 78 rpm (78 optional)
Dust cover
Available in matt black, glossy black, glossy white, silver, red, yellow, blue and green

(The colours in pictures may differ slightly from the actual article due to inaccuracies in the photo reproduction.)

Turntable:

A quit running AC motor with a two-step metal pulley drives the hub and platter via a flatter-ground belt.
The medium density fibre plinth stands on four feet which act as shock absorbers.
The motor is decoupled from the plinth to reduce vibration transmission.
The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3 kg and a felt mat.
The platter’s low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing house.
External power supply avoids potential electro-mechanical interference.

Tonearm Pro-Ject 8.6:

The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.
Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
The headshell and undamped armtube are fashioned from a single piece.
The inverted horizontal bearing consists of two hardened stainless steel points bearing in sapphire cushes.
Flexible counterweight shaft avoids vibration at undesirable frequencies.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The straight armtube with an effective length of 8.6’ reduces toe-in error.
The internal wiring cable has gold-plated plugs and appropriate capacitance and inductance values.
Dimensions W x H x D: 415 x 118 x 320 mm (with dust cover closed); 415 x 365 x 405 mm (with dust cover open)
Cartridge: Output value 4 mV; recommended load resistance 47 kOhms (MM-input)

Pro-Ject Phono MM Box:

Metal case shields the electronics from vibrational and electromagnetic interference
Small size allows installation close to record player
Special low-noise ICs used
Optimal channel separation through dual-mono circuitry
Gold plated RCA connection sockets
Outboard power supply included

Technical data:

Pro-Ject Debut III

Fitted cartridge: Ortofon OM 5E
Amplifier connection: MM-input
Nominal speeds: 33 / 45 / 78 rpm*
Dust cover: yes
Tonearm: Pro-Ject 8.6
Effective tonearm length: 8,6 " (218,5 mm)
Effective tonearm mass: 9,5 g
Overhang: 18,5 mm
Supplied counterweight cartridge weight: 3,5 - 5,5 g
Optional counterweights cartridge weights: 6 – 9 g, 1,5 – 3 g
Downforce range: 10 – 30 mN
Speed variance: ±0,8%
Wow and flutter: ±0,12%
Signal to noise: –65 dB
Platter weight/diameter: 1,3 kg / 280 mm
Power supply type: Mains-fed outboard power supply 220 – 240 V, 50 cycles or 100 – 110 V, 60 cycles
Output voltage: 16 V / 500 mA AC
Power consumption: 2 W
Depth (lid open): 400 mm
Height (lid open): 370 mm
Dimensions (W x H x D): 415 x 365 x 405 mm (lid open)
Dimensions (W x H x D): 415 x 118 x 320 mm (lid closed)
Weight: 5,5 kg

*Electronic speed change between 33 and 45 rpm, when the optional Pro-Ject Speed Box II or Pro-Ject Speed Box SE II is used. Using this Speed Boxes, 78 rpm is available after fitting a special pulley, which may be purchased as an optional extra.

Technical data:

Pro-Ject Phono MM Box

Input impedance: 47 kohms / 100 pF
Gain: 32 dB
Output voltage typically: 200 mV / 1 kHz at 5 mV / 1 kHz
Noise floor: 82 dB (88 dB - A weighted)
THD: <0,005%
RIAA-equalisation curve accuracy: 20 Hz - 20 kHz / max. 0,5d B
Power consumption: 16 V / 40 mA AC
Power supply type: Mains-fed outboard power supply
Output voltage: 16 V / 200 mA AC
Dimension (W x H x D): 105 x 30 x 75 mm
Weight: 280 g without power supply

This product was added to our catalogue on Friday, 29. June 2007.

Welcome back !

Forgotten password?

Languages

Manufacturer