Pro-Ject Debut III Turntable - Blue glossy
Manual turntable with fitted cartridge Ortofon OM 5E.
Good sound from sound technology:
- Tonearm bearing comprises inverted hardened stainless-steel points and sapphire thrust-pads
- Headshell and armtube formed from a single aluminium workpiece, rotation allows adjustment of needle azimuth despite fixed headshell
- Steel platter with felt mat
- Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
- Motor decoupled to reduce vibration
Features:
- Supplied with Ortofon OM 5E cartridge fitted
- Pro-Ject 8.6 tonearm
- Nominal speeds of 33 / 45 / 78 rpm (78 optional)
- Dust cover
Available in matt black, glossy black, glossy white, silver, red, yellow, blue and green
Turntable:
- A quit running AC motor with a two-step metal pulley drives the hub and platter via a flatter-ground belt.
- The medium density fibre plinth stands on four feet which act as shock absorbers.
- The motor is decoupled from the plinth to reduce vibration transmission.
- The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3 kg and a felt mat.
- The platter’s low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing house.
- External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6:
- The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.
- Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
- The headshell and undamped armtube are fashioned from a single piece.
- The inverted horizontal bearing consists of two hardened stainless steel points bearing in sapphire cushes.
- Flexible counterweight shaft avoids vibration at undesirable frequencies.
- Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
- The straight armtube with an effective length of 8.6’ reduces toe-in error.
- The internal wiring cable has gold-plated plugs and appropriate capacitance and inductance values.
- Dimensions W x H x D: 415 x 118 x 320 mm (with dust cover closed); 415 x 365 x 405 mm (with dust cover open)
- Cartridge: Output value 4 mV; recommended load resistance 47 kOhms (MM-input)
Technical data:
- Fitted cartridge: Ortofon OM 5E
- Amplifier connection: MM-input
- Nominal speeds: 33 / 45 / 78 rpm*
- Dust cover: yes
- Tonearm: Pro-Ject 8.6
- Effective tonearm length: 8,6 " (218,5 mm)
- Effective tonearm mass: 9,5 g
- Overhang: 18,5 mm
- Supplied counterweight cartridge weight: 3,5 - 5,5 g
- Optional counterweights cartridge weights: 6 – 9 g, 1,5 – 3 g
- Downforce range: 10 – 30 mN
- Speed variance: ±0,8%
- Wow and flutter: ±0,12%
- Signal to noise: –65 dB
- Platter weight/diameter: 1,3 kg / 280 mm
- Power supply type: Mains-fed outboard power supply 220 – 240 V, 50 cycles or 100 – 110 V, 60 cycles
- Output voltage: 16 V / 500 mA AC
- Power consumption: 2 W
- Depth (lid open): 400 mm
- Height (lid open): 370 mm
- Dimensions (W x H x D): 415 x 365 x 405 mm (lid open)
- Dimensions (W x H x D): 415 x 118 x 320 mm (lid closed)
- Weight: 5,5 kg
*Electronic speed change between 33 and 45 rpm, when the optional Pro-Ject Speed Box II or Pro-Ject Speed Box SE II is used. Using this Speed Boxes, 78 rpm is available after fitting a special pulley, which may be purchased as an optional extra.
   
  
(The colours in pictures may differ slightly from the actual article due to inaccuracies in the photo reproduction.)
|
