Pro-Ject Xpression III Comfort - Piano-Lacquer Dark Grey
Manual turntable with fitted cartridge Ortofon 2M Red and electronic speed change, automatic cut-off
Good sound from sound technology:
- Tonearm bearing comprises inverted hardened stainless-steel points and sapphire thrust-pads
- Conical carbon fibre armtube allows adjustment of needle azimuth despite fixed headshell
- Vertical tracing angle adjustable
- Acrylic platter
- Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
- Motor decoupled to reduce vibration
- Rubber-damped aluminium cones
Features:
- Supplied with audio-technica AT 95E cartridge fitted
- Pro-Ject 8.6c tonearm
- Electronic speed change for 33 / 45 r.p.m.
- Mechanic speed change for 78 r.p.m.
- Opto-electronic end-of-record switch-off
- Gold-plated RCA phono sockets
- Dust cover
- Plinth in dark grey piano-lacquer finish
Technical data:
- Fitted cartridge: Ortofon 2M Red
- Amplifier connection: MM-input
- Nominal speeds: 33 / 45 / 78 r.p.m.
- Electronic speed change: 33 / 45 r.p.m.
- Mechanic speed change: 78 r.p.m.
- Automatic cut-off: opto-electronically controlled yes
- Dust cover: yes
- RCA phono sockets: yes
- Rubber-damped aluminium cones: yes
- Tonearm: Pro-Ject 8.6c
- Tonearm with fibre armtube and sapphire thrust-pads: yes
- Effective tonearm length: 8,6 " (218,5 mm)
- Effective tonearm mass: 8,7 g
- Overhang: 18,5 mm
- Supplied counterweight: cartridge weight 4 - 7 g
- Optional counterweight: cartridge weight 7 - 12g
- Downforce range: 10 - 30 mN
- Speed variance: ±0,5%
- Wow and flutter: ±0,1%
- Signal to noise: -70 dB
- Platter weight/diameter: 0,9 kg / 300 mm
- Power supply type: Mains-fed outboard power supply 220 - 240 V, 50 cycles or 100 - 110 V, 60 cycles
- Output voltage: 16 V / 500 mA AC
- Power consumption: 10 W
- Dimensions (lid open): 415 x 365 x 405 mm (W x H x D)
- Dimensions (lid closed): 415 x 118 x 320 mm (W x H x D)
- Weight: 5,5 kg
|
