Pro-Ject Debut III Turntable - Red glossy
Manual turntable with fitted cartridge Ortofon OM 5E.
Good sound from sound technology:
- Tonearm bearing comprises inverted hardened stainless-steel points and sapphire thrust-pads
- Headshell and armtube formed from a single aluminium workpiece, rotation allows adjustment of needle azimuth despite fixed headshell
- Steel platter with felt mat
- Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
- Motor decoupled to reduce vibration
Features:
- Supplied with Ortofon OM 5E cartridge fitted
- Pro-Ject 8.6 tonearm
- Nominal speeds of 33 / 45 / 78 rpm (78 optional)
- Dust cover
- Available in matt black, glossy black, glossy white, silver, red, yellow, blue and green
   
  
(The colours in pictures may differ slightly from the actual article due to inaccuracies in the photo reproduction.)
Turntable:
- A quit running AC motor with a two-step metal pulley drives the hub and platter via a flatter-ground belt.
- The medium density fibre plinth stands on four feet which act as shock absorbers.
- The motor is decoupled from the plinth to reduce vibration transmission.
- The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3 kg and a felt mat.
- The platter’s low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing house.
- External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6:
- The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.
- Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
- The headshell and undamped armtube are fashioned from a single piece.
- The inverted horizontal bearing consists of two hardened stainless steel points bearing in sapphire cushes.
- Flexible counterweight shaft avoids vibration at undesirable frequencies.
- Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
- The straight armtube with an effective length of 8.6’ reduces toe-in error.
- The internal wiring cable has gold-plated plugs and appropriate capacitance and inductance values.
- Dimensions W x H x D: 415 x 118 x 320 mm (with dust cover closed); 415 x 365 x 405 mm (with dust cover open)
- Cartridge: Output value 4 mV; recommended load resistance 47 kOhms (MM-input)
Technical data:
- Fitted cartridge: Ortofon OM 5E
- Amplifier connection: MM-input
- Nominal speeds: 33 / 45 / 78 rpm*
- Dust cover: yes
- Tonearm: Pro-Ject 8.6
- Effective tonearm length: 8,6 " (218,5 mm)
- Effective tonearm mass: 9,5 g
- Overhang: 18,5 mm
- Supplied counterweight cartridge weight: 3,5 - 5,5 g
- Optional counterweights cartridge weights: 6 – 9 g, 1,5 – 3 g
- Downforce range: 10 – 30 mN
- Speed variance: ±0,8%
- Wow and flutter: ±0,12%
- Signal to noise: –65 dB
- Platter weight/diameter: 1,3 kg / 280 mm
- Power supply type: Mains-fed outboard power supply 220 – 240 V, 50 cycles or 100 – 110 V, 60 cycles
- Output voltage: 16 V / 500 mA AC
- Power consumption: 2 W
- Depth (lid open): 400 mm
- Height (lid open): 370 mm
- Dimensions (W x H x D): 415 x 365 x 405 mm (lid open)
- Dimensions (W x H x D): 415 x 118 x 320 mm (lid closed)
- Weight: 5,5 kg
*Electronic speed change between 33 and 45 rpm, when the optional Pro-Ject Speed Box II or Pro-Ject Speed Box SE II is used. Using this Speed Boxes, 78 rpm is available after fitting a special pulley, which may be purchased as an optional extra.
|
