• Sub-chassis decouples platter and tonearm
• Resonant frequency of the sub-chassis adjustable
• Tonearm bearing comprises inverted hardened stainless tips in ABEC7 spec ballraces
• Headshell and conical armtube formed from a single carbon fibre workpiece
• Armtube allows adjustment of needle azimuth despite fixed headshell
• Vertical tracing angle adjustable
• Platter with perimeter belt drive, vinyl playing surface and record clamp
• Low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing
• Two electrically and mechanically optimised motor units for 33,3 and 45 r.p.m. speeds

Features:

• Pro-Ject 9cc tonearm
• Nominal speeds 33 / 45 / 78 r.p.m. (78 optional)
• Separate motor for 33 / 45 and 78 r.p.m. (78 motor optional)
• Record clamp
• Gold-plated RCA phono sockets
• Dust cover
• Transparent acrylic plinth

Technical specifications:

• Nominal speeds: 33 / 45 / 78 r.p.m. (* 78 optional)
• Separate motor for 33 / 45 and * 78 r.p.m.
• Dust cover: yes
• Sub-chassis: yes
• Record clamp: yes
• RCA phono sockets: yes
• Tonearm: Pro-Ject 9cc
• Carbon-fibre headshell and armtube: yes
• Tonearm with ABEC7 spec ballraces: yes
• Effective tonearm length: 9 " (230 mm)
• Effective tonearm mass: 8,5 g
• Overhang: 18 mm
• Supplied counterweights cartridge weight: 6 - 10 g
• cartridge weight: 11 - 15 g
• Optional counterweight cartridge weight: 8 - 11 g
• Downforce range: 10 - 35mN
• Speed variance: ±0,5 %
• Wow and flutter: ±0,08 %
• Signal to noise: -70dB
• Platter weight/diameter: 2,6 kg / 300 mm
• Power supply type: Mains-fed outboard power supply 220 - 240 V, 50 cycles or 100 - 110 V, 60 cycles
• Output voltage: 16 V / 500 mA AC
• Power consumption: 2 W
• Dimensions (lid open): 460 x 420 x 465mm
• Dimensions (lid closed): 460 x 160 x 365mm
   
   
• Weight: 9,4 kg