Pro-Ject Xperience Comfort Turntable with Ortofon MM-Cartridge 2M Red - Wenge
Manual turntable with electronic speed change, automatic cut-off
and fitted MM-Cartridge Ortofon 2M Red
Good sound from sound technology:
- Tonearm bearing comprises inverted hardened stainless-steel points and sapphire thrust-pads
- Conical carbon fibre armtube allows adjustment of needle azimuth despite fixed headshell
- Vertical tracing angle adjustable
- MDF platter with perimeter belt drive, vinyl playing surface and record clamp
- Low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing
- Motor decoupled to reduce vibration
- Sorbothane-damped aluminium cones
Features:
- MM Ortofon 2M Red
- Pro-Ject 9c tonearm
- Electronic speed change for 33 / 45 r.p.m.
- Opto-electronic end-of-record switch-off
- Record clamp
- Gold-plated RCA phono sockets
- Dust cover
- Plinth in black piano-lacquer finish, cherry, apple, olive and wenge veneer
Technical data:
- Amplifier connection: MM-input
- Nominal speeds: 33 / 45 r.p.m.
- Electronic speed change: 33 / 45 r.p.m.
- Automatic cut-off opto-electronically controlled: yes
- Dust cover: yes
- Record clamp: yes
- RCA phono sockets: yes
- Sorbothane-damped aluminium cones: yes
- Tonearm: Pro-Ject 9c
- Tonearm with fibre armtube and sapphire thrust-pads: yes
- Effective tonearm length: 9 " (230 mm)
- Effective tonearm mass: 9,5 g
- Overhang: 18 mm
- Supplied counterweight: 6 – 9 g
- Optional counterweights: 10 – 15 g, 9 – 11 g, 4 – 6 g
- Downforce range: 10 – 30 mN
- Speed variance: ±0,5%
- Wow and flutter: ±0,08%
- Signal to noise: -70 dB
- Platter weight/diameter: 2 kg / 300 mm
- Power supply type: Mains-fed outboard power supply 220 – 240 V, 50 cycles or 100 – 110 V, 60 cycles
- Output voltage: 16 V / 500 mA AC
- Power consumption: 10 W
- Dimensions (W x H x D): 460 x 417 x 460 mm (lid open); 460 x 160 x 360 mm (lid closed)
- Weight: 7,7 kg
|
