Audio-Technica VM 750 SH

The AudioTechnica VM 750 SH is a MM cartridge equipped with a Shibata tip, which has a particularly good image at the top of the spectrum (midrange and treble) and perfectly scans the medium and extreme depths. Originally, the shape of Shibata's tip was designed for analog quadrophony.

• Easy reading of mediums and highs with a typical Shibata sound and a high volume.
• VM double magnet system with exceptional channel separation, extended frequency response and superior scanning capability.
• Tempered and lightweight aluminum cantilever for high fidelity when playing recording grooves.
• Middle Shield allows effective separation of left and right channels and eliminates electrical crosstalk up to 40 dB
• Die-cast aluminum alloy housing reduces vibration and provides natural electrical shielding.

AudioTechnica's patented dual magnet design principle is based on vinyl record reproduction.

Instead of a single large magnet, two V-shaped magnets are precisely aligned to accurately scan the right and left channels of the sides of the stereo groove. In this way, a VM system provides exceptional channel separation, extended frequency response, and superior sampling capacity.


System with para-toroidal generator

Para Toroid coils improve the efficiency of the generator and provide outstanding linearity, since only a small part of the magnetic flux can escape due to the continuous symmetrical design of the magnetic circuit (parasitic flux), in addition, the permeability of the magnetic cores is optimized by the stratified core structure.


Medium shielding plate for reduced crosstalk

The central permalloy shielding plate allows efficient separation of the left and right channels and eliminates electrical crosstalk up to 40 dB. This corresponds approximately to the actual crosstalk values ​​of a recording groove.

Technical characteristics

• Principle: MM
• Frequency response: 20 Hz-27 kHz
• Channel separation: 30 dB
• Balancing of the channels: 1. dB
• Output voltage: 4. mV
• Vertical reading angle: 23 °
• Supporting force: 1.8 / 2.2g
• Recommended support force: 2g
• Tip: Shibata
• Size of the tip: 0.26 x 02.7 mil
• Assembly: integral
• Cantilever: conical aluminum
• Compliance: 18 x 10-6cm / dyne
• Coils: para-toroidal, conductors (6N-OFC)
• Mobile magnet: VM Double magnet
• Load impedance: 47 Kohms
• Load capacity: 100-200 pF
• Mass cartridge: 8g
• Height: 17.3 mm
• Fixing: 1/2 inch
• Replacement Diamond: VMN 50 SH