No results were found for the filter!
This Clearaudio bubble level is a high-precision gold-plated stainless steel measuring instrument, allowing you to properly balance the turntable and tray. Height: 10/14 mm Diameter: 40 mm Weight: stainless steel gold 73 gr Gold plated...
The Pro-Ject Measure it E is the economic variant of the digital scale and fully fulfills its purpose. The measuring range is from 0 to 5g (0 to 50mN), the measuring accuracy is 0.002g. The measurement calibration is performed with a...
The basic equipment, essential for the correct setting of the cartridge, an Ortofon template for the positioning of the artridgesl, as well as a manual balance for adjusting the support force.
The Thorens mechanical balance is very efficient. It has no influence on the adjustment measures thanks to the anti-magnetic material used. It allows you to correctly adjust the support force of your cartridges. Adjustment range: 1.0 to...
The Analogis Perfect Pitch Stroboscope Disk operates at 50 Hz and 60 Hz, as well as at speeds of 33/45/78 RPM. Disc strobe to determine the ideal speed for 33, 45 and 78 rpm speeds Display variants: perfect speed, too slow and too fast...
The Dual double Adjuster is suitable for current models of the brand's turntable. The height and overweight of the arm are easy to check and adjust. Models with TK 24 adapter are not compatible. It adapts to the following Turntables:...
Ortofon’s new Test Record is designed to allow you to verify your HiFi system in the most natural audio surroundings at home. The Test Record contains special test signals developed for analyzing cartridge performance as well as its...
Ortofon DS-3 is a new lightweight compact digital stylus pressure gauge model. The DS-3 is a miniature ultra precision non-magnetic instrument that tunes your tonearm to the highest possible degree. The DS-3 scale is factory...
This Clearaudio bubble level is a high precision stainless steel measuring instrument, allowing you to properly balance the turntable and the tray. Height: 10/14 mm Diameter: 40 mm Weight: stainless steel gold 73 gr Stainless steel
Clearaudio Cartridge Break In Test Record Phono cartridges usually need a running-in period to reach their full sonic potential. This can take anything from 40 to 100 hours, depending upon the manufacturer, design and construction of the...
Ortofon calibrator is made of a sturdy plastic that is fixed on the central axis and allows the cartridge to be correctly adjusted so that it is installed in the perfect axis of the grooves. Adjustment is quite easy to manage. In...
The Dynavox disk allows you to correctly determinate the position of your cartridges during the installation and also allows you to adjust * or accurately check the speed of rotation of your turntable. Suitable for turntables using a...