No results were found for the filter!
The Audio-Technica AT-LH18H is identical to the AT-LH15H model with 3g more, made of aluminum, also used in aerospace, which virtually eliminates unwanted vibrations. With maximum surface hardness and OFC connection cables This...
€85.00
*
€99.00
*
The Audio Technica AT-HS 4BK is a headshell with a 1/2 "mount for installation on a straight reading arm with 4-pin SME connector, this version is black in color. The headshell consists of a very lightweight aluminum case and a different...
€28.80
*
€32.00
*
The Audio Technica AT-HS 4SV headshell allows you to install a 1/2 "cartridge and fits on a straight reading arm with SME 4-pin connector, this version is silver. The headshell consists of a very light aluminum case and a different color...
€28.80
*
€32.00
*
The AudioTechnica AT 6108 connecting cables are 0.12 mm x 29 conductors with gold connectors, they allow to connect the cartridge to the headshell. cables connecting the headshell to the cartridge Copper 6N-OFC 99.99997% high purity...
€32.95
*
€35.00
*
The AudioTechnica AT 6003R headshell repository can store up to 3 mounted headshell. Compatible with double lock headshells (Pin Lock Headshells or SME type bayonet) Rubber feet for stability The capsules are cut in such a way that the...
€24.00
*
The HPH washers are made of transparent PVC, it protects your headshell fixing screws that can hold your cartridge to avoid any scratches or traces of wear. Dimensions: Diameter: 5 mm Thickness 0.5 mm Inside diameter: 2.5 mm Delivered by...
€7.90
*
The Audio Technica headshell AT-HS6BK weighs 9 grams, made of cast iron with integrated finger lift. Accessories include 2 x 10 mm and 2 x 8 mm screws. The 2 corresponding M2.6 nuts with 2 plastic washers. - Black version Molded aluminum...
€28.50
*
€29.00
*
The Audio Technica headshell AT-HS6SV weighs 9 grams, made of cast iron with integrated finger lift. Accessories include 2 x 10 mm and 2 x 8 mm screws. The 2 corresponding M2.6 nuts with 2 plastic washers. - Silver version Molded...
€28.50
*
€29.00
*
These cable lugs in sets of 4 are available in gold and silver plated and can be connected to all contacts of 1.2 mm. For protection and marking, 4 heat-shrinkable mini tubes in red, green, blue and white are included. Set of 4 pieces to...
From €13.90
*
These cable lugs in sets of 4 are available in silver plated and can be connected to all contacts of 1.2 mm. For protection and marking, 4 heat-shrinkable mini tubes in red, green, blue and white are included. Set of 4 pieces to solder...
€15.90
*
Thorens spacers in different thicknesses from 1 to 3.0 mm * for the TP 11, TP 16 MK II, mainly interchangeable tonearm, allow you to adjust the height of your cartridge to obtain a perfect horizontal. 0,5 mm thickness is sold out and no...
€13.00
*
Thorens special M2 screw to fix your cartridges on the Thorens TP 11 and TP 16 tonearm on the finger riser included. Price for 1 pair to select. Picture 2 shows the screws on the finger lifter that is not included in the screw set.
€15.00
*
Viewed