Audio Technica AT-LP3

The Audio Technica AT-LP3 is a contemporary fully automatic belt-driven turntable that offers a virtuoso analog sound.

The universal cartridge holder and the switchable preamplifier make it possible to use different cartridge MM or MC. The AT-LP3 offers high sound quality at selectable speeds of 33 1/3 or 45 rpm. The plate is made of die-cast aluminum and the 4.5 mm thick rubber mat, in addition to the anti-vibration design, is another important element for a stable and reliable reading.

The Audio Technica AT-LP3 comes with a MM AT91R cartridge and an AT-HS3 universal cartridge holder. Available in black or white.

Technical characteristics

• Type of drive: belt drive
• Type: 2 selectable speeds, manual operation
• Motor: DC servomotor
• Speeds: 33-1 / 3 RPM, 45 RPM
• Tray: die-cast aluminum
• Fluctuation of fluctuation: <0.2% WRMS (33 RPM)
• Signal to noise ratio:> 60 dB
• Output level: Phono Preamplifier: nominal voltage of 3.5 mV at 1 kHz, 5 cm / s
• Preamplifier line: 220 mV nominal at 1 kHz, 5 cm / s
• Power consumption: 2W
• Supplied accessories: dust cover, aluminum tray, rubber mat, transmission belt, counterweight, AT-HS3 cartridge holder, MM AT91R cartridge, 45-speed adapter, power cord.

• Turntable: manual
• Type of drive: belt drive
• Type: 2 selectable speeds, manual operation
• Motor: DC servomotor
• Speeds: 33-1 / 3 RPM, 45 RPM
• Tray: die-cast aluminum
• Fluctuation: <0.15% WRMS (33 RPM)
• Signal to noise ratio:> 60 dB
• Output level: Integral phono preamp: nominal voltage of 4 mV at 1 kHz, 5 cm / s
• Preamplifier line: 200 mV nominal at 1 kHz, 5 cm / s
• Power consumption: 220 V, 50 Hz (EU) Operation: 1.2 W, motor off: 1.1 W, off: 0.2 W
• Supplied accessories: transparent protective cover, turntable, belt, drive belt, counterweight, AT-HS4SV cartridge holder, AT-VM95C mobile magnet cartridge, 45-speed adapter, RCA audio cable (approx. 1.0 m), Power supply electrical (approx. 1.5 m), anti-dust hinges