Audio Technica AT-LP 5x

The Audio Technica AT-LP 5x replaces the previous model AT-LP 5, which offers some improvements like the ability to read Schellac 78 rpm discs and is equipped with a cartridge AT-VM 95E / H already preinstalled on an AT-HS 6 cartridge holder.

It is a direct drive turntable with built-in phono preamp and USB interface. The turntable is made of cast aluminum with a 5 mm thick rubber mat for a smoother operation. The design and appearance are reminiscent of the 60s and 70s.

• Cartridge Dual Moving Magnet (MM) Stereo AT-VM95E - Cartridge Holder AT-HS6
• Audio-Technica's J-shaped tonearm
• Cast aluminum tray
• Audio-Technica rubber mat 5 mm thick black
• Elegant black finish
• Selectable speeds: 33 rpm, 45 rpm and 78 rpm

• Direct Drive Platinum
• Selectable Speeds: 3
• Manual operation
• DC motor
• Speeds 33-1 / 3 rpm, 45 rpm and 78 rpm
• Turntable made of cast aluminum
• Starting torque> 1.0 kgf.cm
• Electronic braking system
• Fluctuation of fluctuations <0.2% WRMS (33 rpm) at 3 KHz
• Signal to noise ratio> 50 dB
• Output Level Output Level Phono Preamplifier (Off): 4.0 mV nominal at 1 kHz, 5 cm / sec
• Output Level Line Preamplifier (active): 250 mV nominal at 1 kHz, 5 cm / sec
• Phono preamp, nominal value of 36 dB, RIAA MC equalization: nominal value of 56 dB, RIAA equalization
• Operating voltage 100-240V AC, 50/60 Hz
• Power consumption 3 W
• Dimensions 450.0 mm (17.72 ") W x 352.0 mm (13.86") D x 157.0 mm (6.18 ") H
• Weight 7.3 kg (16.1 lb)
• USB A / D, D / A - 16 bit 44.1 kHz or 48 kHz selectable; USB interface: USB mini 1.1 compatible with Windows XP, Vista or MAC OSX
• Included Accessories Dust cover with mounting accessories: Cartridge AT-VM 95E Dual Moving Magnet (MM) Stereo, Cartridge Holder AT-HS16, Power Cord, Dual RCA Cable (Male) to Dual RCA (Male), Adapter 45 rpm, USB cable