Audio Technica AT-VM95SP

The Audio Technica AT-VM95SP completes the VM 95 range, equipped with a 78t tip, Stereo sound is highly recommended for reading well-known shellac recordings that include only single-channel modulations. The interaction of a tip called SP ("SP" or "Short Play" means a 78 rpm shellac disk) with a stereo cartridge like the AT-VM95SP and a commercially available stereo phono preamplifier, the circuit "MONO" Function to significantly reduce playback noise.

The use of a special phono EQ preamplifier for storage promises a very low level of noise and distortion, because the "old" recordings record only the most damaged grooved side - so it is perfectly suitable for Professional archiving with various functions to produce a mono signal from a stereo. Input signal such as mono variable mix L + R, mono L, mono R, LR.

 

• Aluminum cantilever
• Output voltage 2.7 mV
• Case compatible with all diamonds of the VM95 series
• Frequency response 20 to 23,000 Hz

• Model: AT-VM95SP
• VM type: double stereo magnet
  Mounting: 1/2 "center
• Frequency response: 20 - 23,000 Hz
• Channel separation: 23 dB (1 kHz)
• Output channel balance: 1.5 dB (1 kHz)
• Output voltage: 2.7 mV (at 1 kHz, 5 cm / dry)
• Vertical tracking angle: 23 °
• Vertical tracking force: 4.5 to 5.5 g (standard 5.0 g)
• Tip: SP (3 mil) conical size
• Tip size: 3 mil
• Cantilever: aluminum tube
• Coil impedance: 3.3 kΩ (1 kHz)
• Coil Inductance: 550 mH (1 kHz)
• DC resistance: 485 Ω
• Static agreement: 17 x 10 - 6 cm / dyn
• Dynamic matching: 6.5 x 10 - 6 cm / dyn (100 Hz)
• The coil wire uses: copper TP
• Recommended load impedance: 47,000 Ω
• Recommended load capacity: 100-200 pF
• Cartridge - weight: 6.1 g
• Dimensions: 17.2 x 18.9 x 28.3 (H x W x D mm)
• Replacement needle: AT-VMN95SP
• Accessories included: two 11mm installation screws, two 8mm installation screws, two washers