Audio Technica AT-VM95ML / H Mounted on a cartridge holder AT-HS6

The Audio Technica AT-VM95ML / H cartridge is mounted on an AT-HS 6 cartridge holder, equipped with a microlinear nude diamond, the Audio Technica AT-VM95ML stereo cartridge has a doubled life, due to its Special cut and Line-Contact tip, the Microline tip gives an extended frequency response and increased resolution of medium and high vibrations.

A cartridge equipped with a high-end tip, to obtain a great musical quality on today's turntables and many old models.

An excellent compromise in this new VM 95 series.

•     Model: AT-VM95ML
•     VM type: double stereo magnet
•     Mounting: 1/2 "center
•     Frequency response: 20 - 25,000 Hz
•     Channel separation: 23 dB (1 kHz)
•     Output channel balance: 1.5 dB (1 kHz)
•     Output voltage: 3.5 mV (at 1 kHz, 5 cm / dry)
•     Vertical tracking angle: 23 °
•     Vertical tracking force: 1.8 to 2.2 g (standard 2.0 g)
•     Tip: Microline nude
•     Tip size: 2.2 x 0.12 mil
•     Cantilever: aluminum tube
•     Coil impedance: 3.3 kΩ (1 kHz)
•     Coil Inductance: 550 mH (1 kHz)
•     DC resistance: 485 Ω
•     Static agreement: 17 x 10 - 6 cm / dyn
•     Dynamic matching: 6.5 x 10 - 6 cm / dyn (100 Hz)
•     The coil wire uses: copper TP
•     Recommended load impedance: 47,000 Ω
•     Recommended load capacity: 100-200 pF
•     Cartridge- weight: 6.1 g
•     Dimensions: 17.2 x 18.9 x 28.3 (H x W x D mm)
•     Replacement needle: AT-VMN95ML
•     Accessories included: two 11mm installation screws, two 8mm installation screws, two washers