Audio Technica AT-VM95EN / H Mounted on a cartridge holder AT-HS6
Prices incl. VAT plus shipping costs
in stock - immediate delivery
- Article number: 104487
The AT-VM95EN / H Audio Technica cartridge is pre-mounted on an AT-HS6 cartridge holder and is easy to adjust with a balance for the supporting force.
The cantilever is equipped with a nude elliptical diamond tip; This allows for a lighter and more rigid transmission system than that used with a diamond tip with a round titanium rod, as is the case with the AT-VM95E. The nude elliptical diamond offers, at a higher price, a better quality of hearing with an extraordinary fidelity in the audio reproduction.
Elliptical nude
A nude elliptical diamond follows the deviations of the disc groove with greater precision than a conical tip, allowing for better frequency response with higher phase fidelity and lower distortion.
VM95 Series - Stereo Cartridge, Nude Elliptical, with Cartridge Holder AT-HS6
- AT-VM95EN pre-assembled on the cartridge holder AT-HS6BK
- Total weight 15.5 g
- Pre-assembled and tested in the Audio-Technica factory in Fukui (Japan)
- Model: AT-VM95EN
- VM type: double stereo magnet
- Mounting: 1/2 "center
- Frequency response: 20 - 23,000 Hz
- Channel separation: 22 dB (1 kHz)
- Output channel balance: 2.0 dB (1 kHz)
- Output voltage: 3.5 mV (at 1 kHz, 5 cm / sec)
- Vertical tracking angle: 23 °
- Vertical tracking force: 1.8 to 2.2 g (standard 2.0 g)
- Tip: elliptical nude
- Tip size: 0.3 x 07 mil
- Cantilever: aluminum tube
- Coil impedance: 3.3 kΩ (1 kHz)
- Coil Inductance: 550 mH (1 kHz)
- DC resistance: 485 Ω
- Static agreement: 17 x 10 - 6 cm / dyn
- Dynamic matching: 6.5 x 10 - 6 cm / dyn (100 Hz)
- The coil wire uses: copper TP
- Recommended load impedance: 47,000 Ω
- Recommended load capacity: 100-200 pF
- Cartridge - weight: 6.1 g
- Dimensions: 17.2 x 18.9 x 28.3 (H x W x D mm)
- Replacement needle: AT-VMN95EN
- Accessories included: two 11mm installation screws, two 8mm installation screws, two washers
