Audio Technica AT-VM95C

The AT-VM95C Audio Technica cartridge represents the current entry-level model with a tapered tip and replaces the proven AT90 series cartridges (eg AT91, AT91R and CN5625AL).

The AT-VM95C is a low-cost cartridge offering the possibility of exchanging the conical diamond for one of four other higher order diamonds (elliptical, elliptical / nude, Microline and shibata).

• Aluminum cantilever
• Output voltage 4.0 mV
• Housing compatible with all VM95 diamonds
• Replacement for AT91, AT91R and CN5625AL
• Weight: 16 g

• Model: AT-VM95C
• VM type: double stereo magnet
• Mounting: 1/2 "center
• Frequency response: 20 - 20,000 Hz
• Channel separation: 18 dB (1 kHz)
• Output channel balance: 2.5 dB (1 kHz)
• Output voltage: 4.0 mV (at 1 kHz, 5 cm / dry)
• Vertical tracking angle: 23 °
• Vertical tracking force: 1.8 to 2.2 g (standard 2.0 g)
• Tip: conical
• Tip size: 0.6 mil
• Construction: round tip
• Cantilever: aluminum tube
• Coil impedance: 3.3 kΩ (kHz)
• Coil Inductance: 550 mH (1 kHz)
• DC resistance: 485 Ω
• Static agreement: 17 x 10 - 6 cm / dyn
• Dynamic matching: 6.5 x 10 - 6 cm / dyn (100 Hz)
• The coil wire uses: copper TP
• Recommended load impedance: 47,000 Ω
• Recommended load capacity: 100-200 pF
• Cartridge - weight: 6.1 g
• Dimensions: 17.2 x 18.9 x 28.3 (H x W x D mm)
• Replacement needle: AT-VMN95C
• Accessories included: two 11mm installation screws, two 8mm installation screws, two washers