Pro-Ject Pick it S2 C
- Article number: 882501
The Ortofon Pick-it S2 C cartridges of the Concorde series enjoy extraordinary popularity, especially among professional DJ's, whereby an often little noticed detail is based on the fact that Concorde originally represented a HiFi system.
Concorde wants to reclaim this position! The fruitful cooperation between Pro-Ject and Ortofon resulted in another high-quality cartridge system: Pick-it S2, a stylus of the finest! Pick-it S2 can be easily inserted and removed to fit all tonearms with SME cap nuts. The body of the system is finished in elegant silver and offers a sweeping and exciting sound that reveals unprecedented detail, accuracy, forward momentum and stage unsurpassed in its price range.
With 6 milivolts of output voltage, Pick-it S2 is ideally suited for weaker phono preamplifiers as well as DJ turntables. The SME connection allows mounting in a matter of seconds, which in turn makes it possible to place desired systems on a suitable tonearm "in the twinkling of an eye", so to speak. If necessary, the needle can also be exchanged for a higher-quality one, such as OM 20/30.
The polycarbonate body offers a mature rigidity, which gives the sound a wonderful fullness.
Technische Daten | |
Tonarm-Befestigung | SME-Bajonett |
Tonabnehmer-Typ: | MM (Moving-Magnet) |
Ausgangsspannung: | 6mV* |
Verstärkeranschluss: | Phono MM |
Kanalabweichung bei 1 kHz: | 1,5dB |
Übersprechdämpfung bei 1kHz: | 23dB |
Übersprechdämpfung bei 15kHz: | 15dB |
Frequenzbereich: | 20-22.000Hz |
Frequenzgang: | 20-20.000Hz ±2dB |
Abtastfähigkeit bei 315Hz: | 80µm** |
Nadelnachgiebigkeit: | 7µm/mN |
empf. Tonarm-Typ: | mittelschwer und schwer mit SME-Bajonett |
Abtastdiamant: | elliptisch |
Verrundung: | r/R 13/25µm |
Auflagekraftbereich: | 20-50mN (2,0-5,0g) |
empf. Auflagekraft: | 30mN (3,0g) |
Abtastwinkel: | 20 Grad |
Gleichstromwiderstand: | 750Ohm |
Induktivität: | 450mH |
empf. Abschlusswiderstand: | 47kOhm |
empf. Abschlusskapazität: | 200-600pF |
Gehäusematerial: | Messing/Polycarbonat |
Höhe: | 18mm |
Gewicht: | 18,5g |
Ersatz-Nadeleinschub: | Stylus Pick it S2 |
*bei 1000Hz, 5cm/sec. **bei empfohlener Auflagekraft |