Transrotor Phono 8.2 MC

The Transrotor Phono 8.2 MC is a symmetrical MC preamp, built in two parts, one for the phono stage, the other for the power supply.
One acts as an external power supply, the other is to prepare MC signals without interference. MM cartridge are unfortunately out of place here, and they are not compatible with this set.
The input impedance can be adjusted wonderfully and finely in 16 steps ranging from 60 ohms to 4.7 kilohms. The sensitivity can also be selected in 16 steps between 0.07 mV and 2.0 mV.

Technical characteristics

• MC gain adjustable from 0.1 mV to 2 mV
• Frequency Response (RIAA) 20Hz to 20KHz, +/- 0.1dB
• MC input resistor 60 ohms up to 4.7 kOhm adjustable
• Current consumption <9VA
• Housing 6 mm aluminum
• 12 mm aluminum front panel
• 1 x XLR input
• Output 1 x RCA
• Dimensions (B / H / D) 176/757/300 mm