cleaning arm for turntable on base
The disc cleaning arm with a carbon fibre brush cleans the disc and drifts the electrostatic.
To optimize performance, the base of the cleaning arm must be mounted so that the carbon fiber brush can reach the center of the turntable. The height of the cleaning arm must be adjusted so that it is parallel to the surface of the disc, then the screw is tightened on the base. The optimal pressure is controlled by moving the weight on the arm. The cleaning arm is electrically conductive from the tip of the carbon fiber brush to the base. The end of the supplied grounding cable is connected to the plug, the other to the ground of the amplifier, so that electrostatic electricity is dissipated and the minimum dust is attracted.
Mainly suitable for classic vinyl turntables, usually on a base such as Sony, Denon, Dual, Thorens, Pioneer, JVC etc.