Audio Technica AT-OC9XEB
- Article number: 104856
The Audio Technica AT-OC9XEB MC cartridge is the direct successor of the AT-F2, with the technology and design of the legendary OC 9. For the price of just over 200 euros, this entry-level cartridge is more than affordable and represents great value.
The diamond is elliptically cut, the cantilever is made of aluminium.
Audio Technica has improved the fastening system and added threaded inserts to the OC9X product line. Screws with nuts are superfluous.
- With elliptical diamond and unsupported aluminium carrier.
- A neodymium magnet and a pure iron yoke provide increased magnetic energy
- Threaded inserts allow the cartridge to be attached to the headshell or integrated tonearm with just two screws - no nuts are required
- The aluminium housing minimises unwanted vibrations for reduced resonance and excellent audio reproduction
- Pure copper is used for the coils using the Ohno continuous casting process (PCOCC) to achieve the purest possible signal
Modell | AT-OC9XEB |
Montage | 1/2 ”Mitten / Gewindeeinsätze |
Frequenzgang | 20 bis 30.000 Hz |
Körpermaterial | Aluminium |
Kanaltrennung | 25 dB (1 kHz) |
Ausgangskanal-Balance | 1,5 dB (1 kHz) |
Ausgangsspannung | 0,32 mV (bei 1 kHz, 5 cm / s) |
Vertikaler Verfolgungswinkel | 20 Grad |
Vertikaler Verfolgungskraftbereich | 1,8 bis 2,2 g (Standard 2,0 g) |
Stiftform | Elliptical Bonded |
Stiftgröße | 0,3 x 0,7 mil |
Stiftaufbau | Rundschaft verklebt |
Freischwinger | Aluminiumrohr |
Spulenimpedanz | 12 Ohm (1 kHz) |
Spuleninduktivität | 25 μH (1 kHz) |
Gleichstromwiderstand | 12 Ohm |
Statische Konformität | 20 · 10 & supmin; & sup6; cm / Dyn |
Dynamische Compliance | 9 x 10 - 6 cm / dyn (100 Hz) |
Anschlussstifte | Messing |
Draht für Spule verwendet | PCOCC (Kupfer im Stranggussverfahren von Ohno) |
Empfohlene Lastimpedanz | Min 100 Ohm |
Gewicht | 7,6 g |
Maße | 17,3 (H) x 16,8 (B) x 25,7 (L) mm |
Einschließlich Zubehör | 1 nicht magnetischer Schraubendreher, 1 Bürste; 2 Unterlegscheiben, 4 Paar Befestigungsschrauben: 5 mm, 8 mm, 10 mm, 12 mm 1 Kunststoffschutz |